Norwood LumberMax HD38 Instrucciones Originales página 13

Pump Hoses and Oil Installation
Connect the 24" (61 cm) pressure pump
hose (item #10) to the valve pressure
port (P) (see illustration below).
Note: Always check for damaged hoses,
loose fittings and signs of leaks before
each use.
P
Connect the 19" (48 cm) return tank
hose (item #9) to the valve return port
(see illustration below).
Note: Always check for damaged hoses,
loose fittings and signs of leaks before
each use.
T
The illustration shows pressure and
return valve ports.
TANK RETURN
PUMP PRESSURE
EN–9