- Do not expose the device to direct sunlight, intense light, or
strong magnetic fields.
- Allow adequate ventilation around the adapter when using
it to operate the device. Do not cover the power adapter with
objects that could reduce cooling.
- To avoid risks, do not disassemble, short contact, incinerate,
or heat up the battery above 60 ºC.
- Make sure the product is not plugged in the power supply or
on after every use and before carrying out any cleaning or
maintenance task. To disconnect it, do not pull on the power
cord. Instead, pull on the adapter.
- Do not twist, bend, strain, or damage the power cord. Do not
place any heavy or sharpened objects on the cord, as this
could cause a fire or electrical shock.
- The device should not be unattended while it is connected to
a power supply.
- The filling inlet must not be open during operation.
- The device should not be used if it has fallen, if there are any
visible signs of damage, or if it leaks.
- Keep the device out of reach of children when it is under
tension or cooling down.
- Do not use the robot on frameless glass.
- Do not use the product on cracked glass. Reflective coating
or glass may be slightly scratched due to dirt on the glass
during operation.
- This appliance can be used by persons with reduced physical,
sensory, or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning the use of the appliance in a safe way and
understand the hazards involved. Children must not play
with the appliance.
- Supervise so that they do not play with the appliance. Close
9