Chauvet Professional STRIKE P3 Guía De Referencia Rápida página 3

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Power Linking
It is possible to power link STRIKE P38 products. See the table below for the current draw at each voltage and frequency:
Current Draw
Never exceed 12 A on a single circuit. Power-linking cables can be purchased separately.
Mounting
Before mounting this product, read the
weight of the product. For the Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps.
Mounting Diagram
Mounting clamp
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
<UP> Navigates upwards through the menu list or increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function
STRIKE P38 QRG Rev. 1
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
100 V, 60 Hz 120 V, 60 Hz
0.651 A 0.519 A
Safety Notes. Make sure the mounting clamps are capable of supporting the
Wire (Europe)
Brown
Blue
Green/Yellow
208 V, 60 Hz 230 V, 50 Hz
0.302A 0.279A
Screw Color
Yellow/Brass
Silver
Green
240 V, 50 Hz
0.267 A
Safety cable
EN
2