PNI WK400 Manual De Usuario página 10

drill has been properly inserted by pulling it upwards.
To remove the drill, pull the chuck down with one hand while pulling the drill
up with the other.
Handle mounting
1. Turn the handle to the left.
2. Then rotate the entire handle assembly around the rotary hammer head
until you reach the desired position.
3. Tighten the handle by turning to the right.
4. Press the red button on the handle and insert the included metal gauge
that will determine the depth of drilling.
Operating modes
The PNI rotary hammer has 3 modes of operation: drilling machine, drilling
User manual 10