PNI WK400 Manual De Usuario página 9

Cordless rotary hammer
Warnings
• Remove the rotary hammer from the battery before charging the battery.
• Mount the drill on the rotary hammer before mounting the battery.
• Make sure you have fixed the drill well before using the rotary hammer.
• To reduce the risk of injury, wear protective equipment when using the
rotary hammer.
• When using the rotary hammer, hold it firmly with both hands.
• Do not point the rotary hammer at people. The drill could come out and
seriously injure the person.
• Do not touch the drill immediately after using the rotary hammer. This is
hot and could burn your skin.
Introduction
1. Chuck
2. Handle
3. Battery compartment
4. Operation mode selection
button
5. Battery level LED
indicator
6. On/off button
7. Direction control button
and on/off button lock
8. Hole for the metal bar
for delimiting the drilling
depth
9. Handle release button
SDS PLUS drill assembly/disassembly
Insert the drill into the chuck, rotate it until you find the slot and then press
until you hear a click. First coat the head of the drill with vaseline. Check if the
9 User manual