Publicidad
Idiomas disponibles
Idiomas disponibles
Cordless angle grinder
Warnings
•
Remove the angle grinder from the battery before charging the battery.
•
Mount the disc on the angle grinder before mounting the battery.
•
To reduce the risk of injury, wear personal protective equipment (PPE)
when using the angle grinder.
•
Install only compatible discs that have a maximum operating speed not
lower than the declared maximum speed of the angle grinder.
•
Do not use discs with an operating speed lower than 80m/s.
•
Do not use discs with a diameter greater than 125 mm.
•
Do not use cracked or damaged discs.
•
Use the right disc depending on the material you are working on: iron,
concrete, brick, wood, etc.
•
To avoid the risk of injury, mount the disc on the angle grinder with the
utmost care.
•
Use only the included flange and nut to secure the disc to the angle grinder.
•
Before performing the cutting work, test the grinder safely in an open
space for at least 30 seconds, at maximum speed. If the grinder vibrates or
shakes due to incorrect mounting of the disc, stop the grinder immediately
and check the disc and its mounting.
•
When using the angle grinder, hold it firmly with both hands.
•
Do not bring hands or other parts of the body close to the disc of the
grinder in operation.
•
Before turning off the grinder, make sure that there is no more contact
between its disc and the surface of the object you are working on.
•
Be careful of the sparks that result from polishing. Do not polish near
flammable substances.
•
Do not touch the disc or the material you are working on immediately after
polishing. Both surfaces are hot and you could burn your skin.
•
Do not remove the metal protection around the disc.
User manual
6
Publicidad
