Harman JBL Marine A600 Manual De Propietario página 4

WIRING FOR AUDIO OUTPUT
One subwoofer (4ohm/2ohm)
+ -
Two subwoofers (4ohm)
EN
+ -
Subwoofer
L
Two amplifiers strapped together to one subwoofer
(minimum 4 ohm)
+ -
NOTICE: When strapping, the panel GAIN, FREQ, PHASE and
BASSBOOST controls are non-functional on the Secondary Amp.
All adjustments are made on the Primary Amp.
CONNECTING THE REMOTE BASS
CONTROLLER
Subwoofer
SUB
L R
SUB
R
+ -
Subwoofer
Subwoofer
SUB SUB
L R L
REMOTE
CONTROL
SETTING GAIN, CROSSOVERS, AND BASS
BOOST
SPECIFICATIONS
Power output @
4 ohms (14.4V)
Power output @
4 ohms (12V)
Power output @
R
2 ohms (14.4V)
Power output @
2 ohms (12V)
power output @4ohm
strapping (14.4V)
Max Power
Frequency response
Crossover frequencies
Line-level input
sensitivity
High-level input
sensitivity
Signal-to-noise ratio
THD+N @ rated power
Fuse rating
Dimensions
(W x H x D)
Weight
Recommended wire
gauge
Maximum operation
temperature
Setting the gain
1. Start with control set to minimum,
and the crossover control rotated midway.
2. Choose music with substantial bass
content.
3. Turn the volume control on your receiver to
¾ of its total output.
4. Adjust the control clockwise,
listening carefully to the bass output. If
you hear distortion, turn the
counterclockwise to decrease the gain.
Selecting the crossover frequency
Choose the crossover point to suit listening
preferences. Turn the dials to the left to lower
the crossover point and to the right to raise
the crossover point. Exact crossover settings
depend on your listening preferences.
Selecting the subwoofer phase
Switch the back and forth to
determine which setting provides the most
clean bass output.
Selecting the bass boost
Adjust the control clockwise or
counterclockwise to suit your taste.
Marine A600
350 watts RMS x 1 600 watts RMS x 1
275 watts RMS x 1 475 watts RMS x 1
600 watts RMS x 1 1000 watts RMS x 1
410 watts RMS x 1 690 watts RMS x 1
1900 watts RMS x 1
NA
(Two amplifiers)
1200 watts
25-320 Hz
32-320 Hz variable, 32 -320 Hz variable
12 dB/octave
200 mVrms - 4 Vrms 200 mVrms - 4 Vrms
1 - 22 Vrms
>80 dB
<1%
30 A x 2
8-11/16" x 2-1/16" x 12-5/8" x 2-1/16" x
7-1/8" (220 mm x 7-1/8" (320 mm x
51.3 mm x 180 mm) 51.3 mm x 180 mm)
2.46 kg
8
45°C
control
Marine A1000
2000 watts
25-320 Hz
12 dB/Octave
1 - 22 Vrms
>80 dB
<1%
35 A x 3
3.52 kg
4
45°C