eufy Security S120 Guia De Inicio Rapido página 7

3. Screw the mounting bracket onto the wall.
4. Slot the camera onto the mounting bracket and
make sure it is attached securely.
UP
5. Insert and tighten the camera fixing screw at the
bottom of the camera.
09 EN
UP
UP
UP
SAFETY
• Do not use the product in an environment where the temperature is
too high or too low. Never expose the product to wet environments.
• The suitable temperature for devices and accessories is -20°C to 50°C
(Charging temperature is 0°C to 40°C).
• It is recommended to supply the device in an environment with a
temperature that ranges from 5°C to 25°C.
• Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment that
exceeds the recommended low or high temperature.
• Unless specifically indicated that it is safe to do so in the user guide or
instruction manual, avoid exposing your device to direct sunshine or
excessively wet environments.
• When supplying power, place the device in an environment that has a
normal room temperature and good ventilation.
• The light source contained in this luminaire should only be replaced by
the manufacturer, its service agent or a similarly qualified person.
CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS
USED.
DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS.
Warning:
– Replacing a battery with an incorrect type may bypass safeguards
and create danger;
– Disposal of a battery in a fire or other source of significant heat, or
by crushing, or cutting, may result in an explosion as well as leakage
of flammable liquids and gases;
– Leaving a battery in an extremely hot environment may result in an
explosion as well as leakage of flammable liquids and gases;
– A battery subjected to extremely low air pressure may result in an
explosion as well as leakage of flammable liquids and gases.
EN 10