Descargar Imprimir esta página

Ego Power+ CS1804 Manual De Instrucciones página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

Low Kickback Saw Chain
The ramp-shaped depth gauges ahead of each cutter can minimize the force of a
kickback reaction by preventing the cutters from digging in too deeply at the kickback
zone. Only use a replacement chain that is equivalent to the original chain or has been
certified as a low kickback chain per ANSI B175.1. A low kickback tooth saw chain is a
chain that has met the kickback performance requirements of ANSI B175.1 (American
National Standard for Power Tools-Gasoline-Powered Chain Saws-Safety Requirements)
when tested on the representative sample of chain saws below 3.8 c.i.d. specified in
ANSI B175.1.
The bumper drive link (Fig. 2) also helps
2
deliver low-kickback performance.
CAUTION:
As saw chains are
sharpened during their useful life, they
lose some of the low kickback qualities
and extra caution should be used.
Bumper drive link
Cutter type
GUIDE BAR
This saw comes equipped with a guide
bar that has a small radius nose. Small radius noses generally have less potential for
kickback. When replacing the guide bar, be sure to order the bar listed in this manual.
13
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC

Publicidad

loading

Este manual también es adecuado para:

Cs1804-2Cs1800Cs1800-fc