Descargar Imprimir esta página

Ego Power+ CS1804 Manual De Instrucciones página 28

Publicidad

Idiomas disponibles

Idiomas disponibles

PREPARATION FOR CUTTING
Refer to section"SAFETY INSTRUCTIONS" earlier in this manual for appropriate safety
equipment.
Work Area Precautions
Cut only wood or materials made from wood; do not cut sheet metal, plastics,
masonry, or non-wood building materials.
Never allow children to operate the chain saw.
Allow no person to use this chain saw who has not read this Operator's Manual or
received adequate instructions for the safe and proper use of this chain saw.
When felling a tree, keep everyone - helpers, bystanders, children, and animals - a
safe distance away from the cutting area. During felling operations, the safe distance
should be a least twice the height of the largest trees in the felling area. During
bucking operations, keep a minimum distance of 15 feet (4.5 m) between workers.
Trees should not be felled in a manner that would endanger any person, strike a utility
line, or cause any property damage. If a tree does make contact with a utility line, stay
clear of the tree and the line and notify the utility company immediately.
Always cut with both feet on solid ground to prevent being pulled off balance.
Do not cut above chest height, as a saw held higher is difficult to control against
kickback forces.
Do not fell trees near electrical wires or buildings.
Cut only when visibility and light are adequate for you to see clearly.
Proper Grip On Handles
Wear non-slip gloves for maximum
grip and protection.
With the saw on a firm, flat surface,
hold the saw firmly with both hands.
Always grasp the front handle with
the left hand and the rear handle
with the right hand.
The fingers should encircle the
handle, with the thumb wrapped
under the front handle (Fig. 14).
28
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC
14
BRUSHLESS
Grip with thumb
below handle

Publicidad

loading

Este manual también es adecuado para:

Cs1804-2Cs1800Cs1800-fc