Descargar Imprimir esta página

Ego Power+ CS1804 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

Never use the guide bar as a lever. A bent guide bar can cause premature bar,
chain, and/or sprocket wear, as well as a broken chain or bar, leading to kickback,
chain throw or the ejection of material.
Cut only one work piece at a time.
Use only with the battery packs and chargers listed below:
BATTERY PACK
BA1400, BA1400-FC, BA2800, BA2800-FC,
BA4200, BA4200-FC, BA1400T, BA1400T-FC,
BA2800T, BA2800T-FC, BA4200T, BA4200T-FC,
BA5600T, BA5600T-FC
Do not charge the battery pack in rain or in wet locations.
If situations occur which are not covered in this manual, use care and
good judgment. Contact EGO Customer Service for assistance.
GLOSSARY OF TERMS
Automatic Oiler: A system that automatically lubricates the guide bar and saw chain.
Bucking: The process of cross-cutting a felled tree or log into lengths.
Bucking Spikes: The pointed tooth or teeth for use when felling or bucking to pivot
the saw and maintain position while sawing.
Chain Brake: A device used to stop the saw chain immediately.
Chain Saw Power Head: A chain saw without the saw chain or guide bar.
Drive Sprocket: The toothed part that drives the saw chain.
Felling: The process of cutting down a tree.
Felling Back Cut: The final cut in a tree felling operation made on the opposite side of
the tree from the notching undercut.
16
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC
SAVE THESE INSTRUCTIONS!
CHARGER
CH2100, CH2100-FC,
CH5500, CH5500-FC,
CH2800D, CH2800D-FC,
CH7000, CH7000-FC

Publicidad

loading

Este manual también es adecuado para:

Cs1804-2Cs1800Cs1800-fc