Descargar Imprimir esta página

Electrolux LSV48400L Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is
empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the
programme is complete.
8.1 Using the detergent
A
B
1. Press the release button (B) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (A).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the
release button locks into position.
For information about the
detergent dosage, refer to
the manufacturer's
instructions on the
packaging of the product.
Usually, 20 - 25 ml of gel
detergent is adequate for
washing a load with normal
soil.
Do not fill the compartment
(A) with more than 30 ml of
gel detergent.
8.2 How to select and start a
programme using MY TIME
selection bar
1. Press the button dedicated to the
programme you want to select.
The light related to the button is on.
C
2. Activate ExtraPower if desired.
3. Close the appliance door to start the
programme.
8.3 How to select and start the
programme
1. To select
Pre-rinse, press and
hold
for 3 seconds.
The light related to the button flashes.
2. Close the appliance door to start the
programme.
8.4 How to activate ExtraPower
1. Select a programme using MY TIME
selection bar.
2. Press
.
The light related to the button is on.
ExtraPower is not a
permanent option and must
be activated every time
before you start a
programme.
It is not possible to activate
or deactivate ExtraPower
while a programme is
running.
Activating ExtraPower
increases the water and
energy consumption as well
as the programme duration.
8.5 How to start the AUTO
Sense program
1. Press
.
The light related to the button is on.
2. Close the appliance door to start the
program.
The appliance senses the type of load
and adjusts a suitable wash cycle and its
duration.
8.6 How to delay the start of a
programme
You can delay the start of the selected
programme by 3 hours.
1. Select a programme.
ENGLISH
15
Pre-rinse

Publicidad

loading