Goodyear GY 2802PS Manual De Instrucciones página 38

English • Owner´s manual
Intermittent operation.
Hot blades.
Poor trimming
performance.
Will not charge. Charger
red light flashes.
NOTE: Scissors that have exceeded 100,000 cuts require a complete inspection and
maintenance by a service technician.
ATTENTION!
Do not make any modifications to the tool that could damage its operation. Any alterations or
any alteration or modification will void the product warranty.
If your device continues to give errors or presents any type of problem other than those indica-
ted above, please contact our technical service so that our team can advise you and solve the
problem.
13. TECHNICAL DATA
Model
Max. cutting diameter
Rated voltage
Rated power
Rated current
Voltage
Charger
Net Weight
Autonomy
Charging time
38
Loose internal connections..
On / Off switch failure.
Blade dull.
Blade gap.
Poor lubrication, resulting in excessive friction.
Lubrication is not in place, resulting in excessive friction. Lubricate blade.
Dirty blade.
Blade dull.
Trimming quality is poor.
The battery is not fully charged.
The battery is not properly placed in the charger
The battery charger is not connected properly to the
power supply.
Battery contact point is dirty.
Invalid battery.
Battery charger is invalid.
GY 2802PS GY 2802PSS
Ø28 mm
16.8 V
500 W
2.0 Ah
110-240 V
Nema C Nema A
0,910 Kg
2-3 h
1,5-2 h
Send to repair service center.
Sharpen or replace the blade.
Sharpen or replace the blade.
Lubricate blade.
Clean blade.
Sharpen or replace the blade.
Read the instructions carefully.
Charge the battery.
Insert the battery correctly.
Connect properly.
Clean the battery contacts.
Replace battery.
Replace battery charger.
GY 3202PS GY 3202PSS
Ø32 mm
16.8 V
840 W
2.0 Ah
110-240 V
Nema C Nema A
1 Kg
2-3 h
2-2,5 h
GY 4002PS GY 4002PSS
Ø40 mm
21 V
1050 W
2.5 Ah
110-240 V
Nema C Nema A
1,3 kg
2-3 h
2-2,5 h