Publicidad
Idiomas disponibles
Idiomas disponibles
0
Step 1
• Remove stove, legs and
regulator from packaging.
• Regulator is packed in
the end of the Styrofoam
near front of stove.
• Inspect all packing and
remove all parts.
• Your unit includes:
(1) Side table(s) - 2nd table
optional
(1) Stove
(1) Lid
(1) Waterpan
(1) Regulator,
(1) Grill
(4) Legs
• See replacement parts list for identification.
Step 2
• Use a ground cloth
to protect the finish.
• Place stove on back
and remove side tables.
• Remove legs from
mounting brackets on
bottom of stove.
• Thread legs into
receivers on bottom of
stove handles.
• Stand stove up and adjust leg level-
ers if necessary.
Step 3
• Place side table wire
fingers in holes on top of
stove handles and push
down on table until it
stops.
Step 4
• Open Lid.
• Remove packing from cooking surfaces, merchandising material from
inside lid, and any other combustible materials from inside the stove.
• Do not use the stove without the water pan in place.
• Coleman recommends water in the water pan when in use. This will
help prevent a grease flare-up.
• Make sure pins in
WATER PAN match holes in
COOKTOR
• Cleanup will be improved
if you fill WATER PAN to
mark indicated (MAX).
Publicidad
