Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
Removal Tool for crankshaft pulley,
to be used as OEM 303-1657
1 Thrust bolt
2 Thrust spindle
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool is used for removal the crankshaft pulleys with internal thread on Ford 2.0L EcoBlue
engines, installed in e.g. Ford Transit (2018-), Transit RWD (2018-), Transit Custom (2019-), Ranger
(2019-), Kuga (2019-).
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc..
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Crankshaft Pulley Removal Tool
for Ford EcoBlue 2.0L
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 70924-1
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
