Publicidad
Idiomas disponibles
Idiomas disponibles
2. Glassware
It is necessary to remove any residue from glasses, wine glasses, etc., and place them in the basket
with the bottom facing up.
3. Cutlery
Use the basket to washing cutlery. It is recommended that cutlery is placed with the handles facing
down. Knives and forks must be handled with appropriate care (risk of injury).
6.3. Manual elements
1. Control panel
2. Button functions
Fig. 8
3. Start-up of the device
Turn on the switch located on the wall, open the dishwasher door, place the overflow plug in the
appropriate place (fig. 8) and close the door of the device. Press the On/Off button (fig. 9). After the
tank and the boiler are filled with water the boiler heating element lamp will light up (bottom, fig. 12).
After the heating of water in the boiler is completed, the dishwasher chamber water heating cycle will
begin – the chamber heating element lamp will light up (top, fig. 12). Insert the basket into the device
chamber and wait until the indicator light of the chamber heating element turns off. Before starting
the wash cycle, it is necessary to select the program. Program 2 (120 s.) is the default program. After
pressing the program selection button we will switch to Program 3 (180 s.), which will be signaled by
a flashing lamp (fig. 11), In order to start the wash cycle, press the button (fig. 10). After starting the
wash cycle, the indicator lamp will light up. If the door is opened during the wash cycle, the program
stops automatically. After the door is closed, the program continues the wash cycle. After the pro-
gram is completed, the wash cycle indicator lamp turns off, and the boiler heating element lamp lights
up. Remove the basket from the device chamber.
Fig. 6
Fig. 9
Fig. 10
On/Off
Wash cycle
Fig. 7
Fig. 11
Program
selection
- 34 -
Fig. 12
Indicator light for chamber
and boiler heaters
Publicidad
