Descargar Imprimir esta página

Würth 0715 544 2 Traducción Del Manual De Instrucciones De Servicio Original página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Do not exceed the rated capacity of the jack
This jack is only designated to lift vehicles and
must be supported by an appropriate aid.
Never work on, under or next to the loaded jack.
Keep other people out of the danger zone.
Only use the lifting points on the vehicle that are
indicated by the manufacturer.
Some vehicles require an adapter for the frame
for lifting.
Observe the instructions for use of the manufac-
turer for the correct lifting of the vehicle.
No changes must be made to this device.
Capacity
Item no.:
[t]
07155442
2
07155443
3
07155445
5
071554410
10
071554420
20
071554430
32
Intended use
The jack is only provided for lifting the vehicles. Use
only original Würth accessories. Any other use or
use beyond this scope is considered improper use.
The user is liable for damage in the event
of improper use.
Device elements (fig. I)
1 Support saddle
2 Wire retaining ring
3 Snap ring
4 O-ring
5 Oil filling plug
6 Hydraulic cylinder
7 Release valve
8 Safety valve
9 Bolt
10 Pump piston
Special safety instructions
Technical data
Min.
Max.
height
height
[mm]
[mm]
168
316
185
360
207
402
231
461
243
453
275
440
Only fixations, retaining devices or adapters
supplied by the manufacturer are allowed to be
used.
Do not move the vehicle while it is on the jack.
Only use on firm and level ground, which can
support the loads indicated.
Block the wheels of the vehicle.
Prior to lifting, align the saddle in the centre with
relation to the weight.
Do not set on edges, screws or at other inappro-
priate points.
Screw-off
length of
Weight
support sad-
[mm]
2.5
3.1
4.3
5.6
9.2
12.1
Operation
WARNING!
Risk of injury
Failure to perform regular checks can
result in severe injuries.
Prior to use, carry out a visual check
for damaged weld seams, bending,
loose, worn and missing parts or
leakage.
The jack should be checked by an
authorised customer service repre-
sentative on if it has been subjected
to an abnormal level of load or
impact.
Base plate
size [mm]
dle
48
99x93
60
110x103
70
122x115
80
132x120
60
159x143
-
169x153
9

Publicidad

loading

Este manual también es adecuado para:

0715 544 30715 544 50715 544 100715 544 200715 544 30