Descargar Imprimir esta página

cecotec CAFELIZZIA FAST PRO Manual De Instrucciones página 43

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
3.
Turn the steam knob to the off position and then to the water position to repeat the
process.
4.
Follow the above steps about 5 times until the water tank is empty.
Refill the water tank to the "MAX" mark and repeat the descaling cycle from the
5.
beginning to clean the machine thoroughly. The descaling process is now complete.
5. TROUBLESHOOTING
Problem
Coffee does not come out
No water/steam
Coffee comes out around
the edge of the portafilter
Coffee is too light
Cause
No water in tank. Coffee
grind is too fine. There is too
much coffee in the filter. The
appliance is not turned on
or connected to the power
supply. Coffee has been
tamped/compressed too
much.
There is no water in the water
tank or it is not installed
properly. The machine is not
preheated.
Portafilter not rotated to
full lock position. There is
ground coffee on the edge of
the filter. There is too much
coffee in the filter.
Coffee is not enough ground,
or the grounds are not
pressed enough.
ENGLISH
Solution
Add water. Grind medium-
ground coffee. Fill filter with
less coffee. Connect the unit
to a power supply and turn it
on. Refill the filter basket with
coffee, do not tamp too much.
Fill the water tank with
water and turn on the device.
The machine needs to be
preheated before coffee can
be brewed. Once the machine
is preheated, the indicator
light will turn on.
Rotate filter holder to full lock
position. Wipe off the rim. Fill
with less coffee.
Replace the coffee powder
and flatten it with the
measuring spoon with
tamper.
CAFELIZZIA FAST PRO
43

Publicidad

loading

Este manual también es adecuado para:

01635