Publicidad
Idiomas disponibles
Idiomas disponibles
4. NOTE: Before removing blade drive assembly, note the way it is positioned (this
will help you in reassembly). Remove blade drive assembly (Figure J).
5. Drive bearing should be at its lowest position (See Figure K for correct position of
drive bearing), if not, move it with your finger to lowest position (See Figure L for
incorrect position of drive bearing).
6. Put on new drive assembly, align screw holes and press down (Figure J).
7. Reassemble blade drive by mounting screws (Figure I).
8. Slide Drive cap onto clipper and then snap down to ensure cap is in place (Figure H).
9. Replace blade (Figure D).
USE GUIDELINES FOR LITHIUM-ION BATTERIES
1. The lithium-ion battery included with your clipper does not develop a "memory
effect" like a nickel-metal hydride (NiMH), or nickel cadmium (NiCd) battery. You
can return the clipper to the charger at any time for a full charge, or even use the
battery before a charge cycle is complete. Like most rechargeable batteries,
lithium-ion batteries perform best when used frequently.
2. For maximum battery life, store the clipper in a partially discharged condition if
the unit will be unused for several months. To discharge the battery, run the
clipper just until the charging indicator light turns red. Battery should be
recharged again before re-use if using in cordless.
3. Avoid storing or using the clipper near heat vents, radiators, or in direct sunlight.
Optimum charging will result where the temperature is stable. Sudden increases
in temperature can result in the battery receiving less than a full charge.
4. Many factors influence lithium-ion battery life. A battery that has received heavy
use or is more than a year old may not give the same run-time performance as a
new battery pack.
5. New lithium-ion batteries, unused for a period of time, may not accept a full charge.
This is normal and does not indicate a problem with the battery or charger. The
battery will accept a full charge after several cycles of clipper use and recharging.
6. Disconnect the charger or the clipper from the AC outlet if extended periods of
non-use are anticipated.
CORRECT BATTERY DISPOSAL
The product you have purchased contains a rechargeable battery. The battery is
recyclable. Please dispose of this battery in a responsible manner. Check with your
local solid waste officials for collection facility or the details in your area for recycling
options or proper disposal.
9
Publicidad
