Publicidad
Safety
Signs, symbols and instructions placed on this product must never be covered or removed and must
remain present and clearly legible throughout the entire lifetime of the product. Immediately replace
or repair illegible or damaged signs, symbols and instructions. Contact your local dealer for instruc-
tions.
Any adverse event in relation to the device must be reported to your local dealer and the national
competent authority in a timely manner. The local dealer will forward information to manufacturer.
Caregiver
• Read the user manual carefully before use
and keep it for future reference. Incorrect
use of this product may cause serious
injury to the user
• This product contains small parts which
could present a choking hazard if removed
from their intended placing
• Always use the correct lifting techniques
and aids for this purpose
• Never leave the user unattended in this
product. Ensure permanent supervision
by an adult
• Be aware of any MAX mark indications
before adjustment.
• Repair/replacements must only be made
using new original R82 spare parts and
fittings and carried out in accordance
with the guidelines and service intervals
prescribed by the supplier
• If there is any doubt as to the continued
safe use of your R82 product or if any
parts should fail, stop using the product
immediately and contact your local dealer
as soon as possible
Environment
• Observe the surface temperature on the
product, before placing an user in it. This
goes especially for users with insensitive
skin as they cannot feel the heat. If the
surface temperature is above 41°C then
allow the product to cool before use
User
• If the user is close to the max. load
limit and/or has a lot of involuntary
movements, e.g. rocking, a larger size
with a higher max. load or a different R82
product should be considered
• The head of a user must always be within
EN
the top of the frame
Product
• Carry out all positional adjustments on the
product and accessories and ensure that
all knobs, screws and buckles are securely
fastened before use. Keep all tools out of
the reach of children
• Ensure the stability of the product is
maintained before placing the user in it
• Please check on a regular basis that the
zippers are safely closed.
• Check that all release buttons mesh into
place after adjustment
• Ensure the Anti-slip rubber covers are
functional
• Check on the cover, belts and accessories
and make sure that the Velcro fastens
securely
• The enclosed belts and accessories
cannot be used as long-term supports but
may only be used as an extra help when
positioning the user.
20
etac.com
Publicidad
