Publicidad
Dismounting and mounting the cover
Follow the description below when the cover
needs to be dismounted and washed:
1. Unzip the cover on the back (A) and
underneath the seat (B)
2. Open the velcro underneath the chair (C)
and the cover can be pulled up (D) and off
the chair
Follow the description below to remount the cover
on the chair:
1. Put the cover over the back and pull down
(D). Make sure that the foam cushions in the
cover are placed around the frame
2. Zip the cover on the back of the chair (A)
3. Mount the small cover piece with the zipper
underneath the chair (B). Make sure that the
velcro is pointing downwards
4. Tip up the leg support (E) and the velcro
underneath the seat (C) and underneath
the leg support (C) can be closed. Make
sure that the foam cushions in the cover are
placed around the frame
5. Tip down the leg support (E) and make sure
the velcro is fastened correctly
EN
D
D
E
C
E
E
22
A
A
B
B
C
C
D
D
A
B
B
C
C
C
etac.com
A
Publicidad
