cecotec BOLERO AGUAZERO 6100 E Manual De Instrucciones página 87

Damage to glassware and other dishes
Possible causes
Type of glass or manufacturing process. Chemical composition of the detergent.
-
Water temperature and duration of the dishwasher programme.
-
Recommended solution:
Use glass or porcelain dishes that have been marked as dishwasher safe by the
-
manufacturer.
Use a mild detergent that is dishwasher safe. If necessary, request further information to
-
the manufacturers.
Select a low temperature programme.
-
To avoid damage, do not remove the cutlery and glasses from the dishwasher
-
immediately after finishing the programme.
At the end of the wash
Once the washing cycle has finished, the dishwasher will beep 6 times and then will stop.
Switch off the device by pressing the power icon, close the water supply and open the
dishwasher door. Wait for a few minutes before emptying the dishwasher to avoid touching
the dishes and utensils when they are still hot and more likely to break. They will also dry
better.
6. OPERATION
6.1 Control panel
Fig. 17
1. Power icon: press this icon to switch on or off the appliance.
2. Programme selection icon: press this icon to scroll through the different washing
programmes. The indicator light of the corresponding programme will light up to show
the selected washing programme.
3. ALT additional function icon: press this icon to select the additional 3 in 1 function. The
upper or lower parts of the appliance are washed. The corresponding indicator light
flashes.
4. Delay icon: press this icon to delay the start time of any cycle automatically up to 24
hours.
5. Start/Pause icon: press this icon to start or pause a washing programme.
6. Programme indicator light: when you select a washing programme, the corresponding
indicator light lights up.
7. Rinse aid refill indicator light: the indicator lights up when it is necessary to refill the rinse
aid dispenser.
BOLERO AGUAZERO 6100E/ INOX E/ DARK E
ENGLISH
87