cecotec BOLERO AGUAZERO 6100 E Manual De Instrucciones página 97

1. Very hard
water
2. Low inlet
There are temperature
stains and 3. Dishwasher
layers of overloading
dirt on 4. Inadequate
glasses and loading.
cutlery Out-of-date or
wet detergent
powder.
5. Empty rinse
aid dispenser.
6. Incorrect
detergent
dosage.
Combination of
Cloudy soft water and too
glasses much detergent.
There is
a yellow- Tea or coffee
brown film stains.
on internal
surfaces
Iron deposits in
the water can
cause a film in the
water.
There is a Hard.
white film
on the inner
surface
To remove stains from glassware
Remove all metal utensils from the dishwasher.
-
Do not add detergent.
Choose the longest cycle.
-
Start the dishwasher and let it run for 18 to 22
-
minutes. The main wash should then be carried
out.
Open the door to pour 2 cups of white vinegar into
-
the bottom of the dishwasher.
Close the door and let the dishwasher finish the
-
cycle. If vinegar does not work repeat the above
procedure but use 1/4 cup (60 ml) citric acid
instead of vinegar.
Use less detergent if you have soft water and select a
shorter cycle to wash the items made of glass.
Use a solution of 1/2 cup bleach and 3 cups of warm
water to remove stains.
WARNING
You have to wait 20 minutes after a cycle to let the
heating elements cool down before cleaning the
inside, otherwise it will burn.
It is recommended to install a special filter to descale
your water supply.
To clean the interior, use a soft and damp cloth with
detergent for dishwasher and use rubber gloves.
Never use any cleaner other than dishwasher
detergent, otherwise foaming may occur.
BOLERO AGUAZERO 6100E/ INOX E/ DARK E
ENGLISH
97