cecotec BOLERO AGUAZERO 6100 E Manual De Instrucciones página 94

ENGLISH
Disconnect the plug
Always remove the mains plug from the socket before cleaning or performing any
-
maintenance. Do not take risks.
Do not use solvents or abrasive cleaners to clean the exterior and rubber parts of the
-
dishwasher. Only use a cloth with lukewarm water and neutral soap. To remove stains
from the interior surface, use a cloth dampened with water and a little vinegar, or a
cleaning product specifically for dishwashers.
When the dishwasher is not going to be used for a long period of time:
-
When going on holiday, it is recommended to run a wash cycle with the dishwasher
-
empty and then unplug it from the power socket. Turn off the water supply and leave the
door slightly ajar. This will help preserve the door gaskets for more time and will prevent
odours forming inside the device.
Moving the appliance
If you want to move the device, try to do so in an upright position. If absolutely necessary, you
can place it on its back.
Gaskets
One of the factors that cause odours to form in the dishwasher is food trapped in the gaskets.
Regular cleaning with a damp sponge will prevent this from happening.
Warning
Danger of electric shock. Disconnect the power supply before installing the dishwasher.
Otherwise, this may cause an electric shock resulting in serious injury or even
death.
8. TROUBLESHOOTING
Error code
When some faults occur, the appliance displays error codes to warn you.
Codes Problem
E1 Door open
E2 Water inlet
BOLERO AGUAZERO 6100E/ INOX E/ DARK E
94
Possible causes
The door is open when the dishwasher is
in operation.
Failure in the water inlet system.
Incorrectly installed or clogged water inlet
hose.