cecotec BOLERO AGUAZERO 6100 FULL-BI E Manual De Instrucciones página 96

ENGLISH
door slightly ajar. This will help preserve the door gaskets for more time and will prevent
odours forming inside the device.
Moving the appliance
If you want to move the device, try to do so in an upright position. If absolutely necessary, you
can place it on its back.
Gaskets
One of the factors that cause odours to form in the dishwasher is food trapped in the gaskets.
Regular cleaning with a damp sponge will prevent this from happening.
Warning
Danger of electric shock. Disconnect the power supply before installing the dishwasher.
Otherwise, this may cause an electric shock resulting in serious injury or even death.
8. HOW TO BUILD IN THE DISHWASHER
8.1 Before installation
The back of the dishwasher must face the wall, the water inlet and drain hoses must be
properly connected to one side or the other of the appliance.
The dimensions required to build in the dishwasher are shown in figure 23.
Fig. 23 key:
1.- Connectors for the power supply cable, water inlet hose and drain hose.
2.- Space for built-in dishwasher
The dimensions of the dishwasher, and the minimum space required to open the door, are
shown in figure 24.
Fig. 24 key:
1.- Dishwasher
2.- Dishwasher door
3.- Dishwasher body
4.- Minimum spaces to open the door (50 mm)
8.2 Installation of the decorative front panel
The dimensions of the front panel are shown in figure 25.
Fig. 25 key:
1.- 2-ø2 holes (depth 10 mm)
BOLERO AGUAZERO 6100 FULL-BI E
96