3. OPERATION
Before the first coffee
1.
Fill the water tank to the maximum amount of water.
2.
Boil water once or twice and then dispose it.
3.
The glass jar, funnel, filter, and all parts that come into contact with water and coffee
should be thoroughly cleaned with warm water and soap.
Coffee brewing
1.
Lift the water tank cover and fill it with potable water.
2.
Place the funnel in its bracket, make sure it is positioned correctly, and then fit the
filter.
3.
Add the right amount of coffee powder in the filter. You can increase or decrease the
amount of coffee powder to your liking.
4.
Gently shake the funnel and filter to distribute the coffee evenly; then, close the
water tank cover and make sure it is positioned correctly.
5.
Insert the glass jar into the heating plate.
6.
Connect the machine to the mains and the display will show 12:00.
7.
Press the power button on the control panel twice and the red-light indicator
will light up. Then, the coffee machine will start operating.
8.
During the brewing process, you can press the power button at any time to stop
operation.
Note: the coffee will stop dripping automatically, but the extraction time from the
glass jar should not exceed 30 seconds to prevent the coffee from overflowing over
the rim of the funnel.
9.
Do not open the water tank cover during the brewing process to avoid getting burnt
by steam or damaging the coffee machine due to the backflow of hot water.
10. Wait until the coffee has finished dripping so that you can remove the glass jar, pour
the coffee in, and enjoy it.
Note: since coffee powder absorbs a certain amount of water, the amount of coffee
poured may be lower. The heating plate will be very hot during operation - do not
touch it!
11.
The keep-warm function will be activated, and the machine will switch off
automatically after 40 minutes if no further operation is performed. If you are not
going to use the coffee machine for a long time, unplug it.
ENGLISH
COFFEE 56 TIME
39