Publicidad
Idiomas disponibles
Idiomas disponibles
13. REMOTE CONTROL UNIT USAGE
The remote control unit enables you to manually control the WAVE 200 XL to clean those hard-to-
reach spots or places that were skipped during the standard cleaning cycle.
Use only with non-rechargeable alkaline LR03 batteries 1.5V AAA. Do not charge non-rechargeable
batteries. Do not mix old and new batteries. Insert batteries in correct polarity. Exhausted batteries
are to be removed from the appliance and safely disposed of. If the appliance is to be stored unused
for a long period, the batteries should be removed. The supply terminals are not to be short-circuited.
To use the remote control unit:
1. Press Start on the MMI to start the
automatic operations of the WAVE 200 XL.
2. Press the On/Off button to activate the
remote control.
3. Press the Forward or Backward buttons to
maneuver the WAVE 200 XL forwards or
backwards at a faster speed.
4. Press the Forward or Backward buttons
again to maneuver the WAVE 200 XL
forwards or backwards at the standard
cleaning speed.
5. To stop the WAVE 200 XL, press the button
showing the opposite direction to the
direction in which the robot is currently
moving.
6. When the robot is idle (standing still)
and you press the Turn Left or Turn Right
buttons, the robot will turn left or right
by moving one belt forward and one belt
backward.
7. If you press the Turn Left or Turn Right
buttons while the robot is driving forward
or backward, the robot will turn left or
right by turning one belt and stopping the
opposite belt.
10
Forward
Turn right
Turn left
Backwards
Touch pad
On/Off switch
WAVE 200 XL
User Instructions
|
Publicidad
