Publicidad
Idiomas disponibles
Idiomas disponibles
5. CONTENTS
Carefully remove all the items from the shipping box and check them against the packing list.
You should have:
• Documentation and accessories
• Un-assembled Caddy for storing and carrying the WAVE 200 XL
• MMI console (includes remote control unit) assembled to the Caddy's handle
• WAVE 200 XL and floating cable rolled on the cable roller
• Power supply unit assembled to the Caddy base
6. ASSEMBLY INSTRUCTIONS
1. Attach the Caddy handle to the Caddy base and fasten with the four screws and four nuts provided.
2. Attach the cable roller in its designated place, and fasten with two screws.
Note that the connection cable is located between the power supply and cable roller.
3. Connect the MMI communications cable to the power supply unit.
4. Connect the connection cable between the power supply and the cable roller.
MMI
Caddy handle
Cable roller
4
MMI communication
cable
Floating cable
Floating cable handle
Top cover
Caddy base
MMI
Remote control unit MMI
Cable roller handle
Connection cable between
power supply and cable roller
Power supply
Main power supply cable
Roller inner connection
WAVE 200 XL
User Instructions
|
Publicidad
