Philips 4400 Serie Manual Del Usuario página 8

Brewing drinks
General steps
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 Insert the small plug into the socket located on the back of the machine. Insert the mains plug into the
wall socket.
3 Press the on/off button to switch on the machine.
-
When all lights in the drink icons light up continuously, the machine is ready for use.
4 Place a cup under the coffee dispensing spout. Slide the coffee dispensing spout up or down to adjust its
height to the size of the cup or glass you are using (Fig. 2).
Brewing coffee with beans
1 To brew a coffee, tap the drink icon of your choice or tap the 'More Drinks' icon.
-
You can now adjust the drink to your personal taste. Use the up and down arrows to adjust the coffee
strength. Tap the OK icon if you want to adjust more settings.
2 Press the start/stop
3 To stop dispensing coffee before the machine is finished, press the start/stop
To brew 2 coffees at the same time, tap the drink icon twice or select the 2x icon scrolling the dedicated
bar.
Do not use caramelized or flavored coffee beans.
Brewing milk-based drinks with LatteGo (milk container)
LatteGo consists of a milk container, a frame and a storage lid. To avoid leakage, make sure the frame
and the milk container are properly assembled before you fill the milk container.
1 To assemble LatteGo, first insert the top of the milk container under the hook at the top of the frame
(Fig. 8). Then press home the bottom part of the milk container. You hear a click when it locks into place
(Fig. 9).
Note: Make sure that the milk container and the frame are clean before you connect them.
2 Slightly tilt LatteGo and put it on the hot water spout (Fig. 10). Then press it home until it locks into place
(Fig. 11).
3 Fill LatteGo with milk (Fig. 12). Do not fill the milk container beyond the maximum indication.
If you have personalized the milk quantity, you may need to fill the milk container with more or less
milk than indicated for this drink on LatteGo.
Always use milk coming directly from the fridge for optimal results.
4 Place a cup on the drip tray.
5 Tap the milk-based drink icon of your choice or tap the 'More Drinks' icon to select a different drink
-
You can now adjust the drink to your own preference.
6 Press the start/stop
-
When you brew cappuccino, flat white, latte macchiato, iced cappuccino or iced latte, the machine
first dispenses milk and then coffee. When you brew caffè latte, café au lait, iced caffè latte, or iced
café au lait, the machine first dispenses coffee and then milk.
button at any time to start brewing the selected drink.
button.
English
button again.
7