Ferroli BLUEHELIX TECH RRT 30 H Instrucciones De Uso página 193

BLUEHELIX TECH RRT 30 H
Exchanger insulation replacement
• Disconnect the power supply and close the gas tap upstream of the valve.
• Remove the cover of the heat exchanger and the burner (see fig. 42).
• Pull out the electrode "1".
• Rotate the insulating disc "2" and remove it.
Fan
2
• Disconnect the power supply and close the gas cock ahead of the valve.
• Remove the connector from the fan
• Remove the gas pipe clamp "1" and undo the screws "2".
• Remove the fan electrical connections and then the fan.
EN
3
2
1
3
fig. 43
cod. 3541C672 - Rev. 00 - 09/2020
1
193