SOLAC LEVITER DIGITAL 5 Instrucciones De Uso página 9

• You can adjust the temperature or time according to your
taste during use. Your settings will be kept for about one
minute after you pull the pot out of the body.
• When finished, remove the pot from the appliance. The
appliance will automatically switch off.
• The fan stops working about 20 seconds later.
• If the food is not cooked as desired, switch it on again for
a few extra minutes.
• CAUTION: Pot and food will be very HOT.
• Place the pot on a flat surface capable of withstanding
high temperatures.
• Steam may escape from the pot depending on the type of
ingredients in the air fryer.
• The fan indicator shows when the fan is working.
TIME AND TEMPERATURE
• You can change the time and temperature by using the
Time and Temperature setting (4).
• Press the time control button (2) and select cooking time
using + and – symbols (4), one minute at a time. Keep the
symbol pressed to change fast the time.
• Press the temperature control button (3) and select the
cooking temperature using the + and – symbols (4).
The temperature will change by 5 ºC at a time. Keep
the symbol pressed to change the temperature fast.
Temperature range: 80 ºC – 200 ºC.
PRE-SET PROGRAMS
• This appliance has 12 pre-set programs.
• To select a program, press the programs button (5). You
can switch from one program to the other by pressing this
same button.
• If you wish, you can also change the temperature and
time settings for the pre-set programs using the according
icons.
• Once the desired program has been selected, press the
ON/OFF button (1) to start the cooking process. You will
see that the timer will start running and the fan indicator
is moving.
• To change any settings while cooking, first Pause the
process, modify the desired setting and then resume the
process by pressing start again.
• NOTE: During the cooking phase, you can press the ON/
OFF button to stop the appliance. The timer will also stop
and display whatever time remains. Press this button
again to resume the cooking phase.
• The fryer will beep when the cooking time has finished.
• Check to see that the food is cooked. If the food is not
cooked as desired, switch it on again for a few extra
minutes.
• Once cooking has finished, take the whole pot out
of the appliance. The appliance will switch itself off
automatically.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Unplug the appliance from the mains.
• Let it cool down.
• Clean the appliance as it is explained in the «Cleaning»
section.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry it.
• Do not use solvents or products with an acid or base pH,
such as bleach, or abrasive products, for cleaning the
appliance.
• Never submerge the appliance in water or any other liquid
or place it under running water.
• It is advisable to clean the appliance regularly and remove
any food that remains.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.
• None of the parts is suitable for cleaning in the
dishwasher.
• The pot and the non-stick coating rack. Do not use metal
kitchen utensils or abrasive cleaning materials to clean
them, as this may damage the non-stick coating.
• Clean the pot and rack with hot water, some washing-up
liquid, and a non-abrasive sponge. Use a degreasing
liquid to remove any remaining dirt.
• Tip: If dirt is stuck to the rack or the bottom of the pot,
fill the pot with hot water with some washing-up liquid.
Put the rack in the pot and let the pot and rack soak for
approximately 10 minutes.
• Clean the inside of the appliance with hot water and a
non-abrasive sponge.
• Clean the heating element with a cleaning brush to
remove any food residues.
• Then dry all parts before their assembly and storage.