Create WARM CRYSTAL 2500 Manual De Instrucciones página 10

• To set the display light, press the button
lighting, press the button again, the screen will disappear, press again, it will return to full
lighting.
• To configure WiFi, press and hold the button
To access the secondary connection mode, press and hold the button again
WiFi icon will flash slowly. Read the Wi-Fi connection details in the following section
"WIFI CONNECTION".
1. To connect the heater to Wi-Fi, you must first download the CREATE Home app on your
device. You will find the app by scanning the QR code below or searching for "CREATE
Home" in Google Play or App Store.
2. Download and install the app. If you do not already have a CREATE Home account, you will
need to create one by clicking Register.
• The device will automatically determine your country, although you can change it if nec-
essary. Enter your phone number or your email address. If you enter a phone number, a
verification number will be sent to your phone; enter this number for approval and then
create a password. If you enter your email address, you will need to create a password.
3. To add your heater to the app, first put it in Wi-Fi connection mode. The heater is in Wi-Fi
connection mode when the Wi-Fi icon
the button WIFI/light for three seconds.
4. Once the icon
of device (Heater) and confirm that the indicator is flashing. You will then be prompted to
enter your home WiFi password. In this way, the app will find your heater using your Wi-Fi
connection.
5. The app will then display its connection screen.
NOTE: If the heater does not turn on, press and hold the button
It will go into secondary connection mode. The heater has two connection modes: one in
which the icon flashes
rapidly (three times per second). Most devices will connect in fast flash mode.
6. The heater will beep and an icon will be displayed
The app will confirm that the heater has been added. Now you can give your device a name,
share it with your family or schedule your heater.
10 E NGL I SH
WIFI CONNECTION
iPhone
starts flashing, go to the app and press "Add a device". Select the type
slowly (once per second) and another in which the icon
WIFI/light. Press once, the screen will be in half
WIFI/light, WiFi icon
Android
flashes. If the icon
fixed when the device is connected.
will flash quickly.
WIFI/light,
does not flash, long press
for another three seconds.
flashes