Descargar Imprimir esta página

GOAL ZERO TANK PRO 4000 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Please read all warnings, instructions and cautions carefully before use to
avoid personal injury, property damage or damage to your Tank PRO 4000,
or any connected products. Goal Zero reserves the right to update this
document without prior notice. Please visit www.goalzero.com to find the
latest product information and the most recent version of the User Guide.
• WARNING - Observe and carefully follow all connector ratings. There is a risk
of excessive heat, melting, fire, or electric shock from the use of accessories,
charging cords, or other electrical connections if the appropriate connector
ratings do not match the Tank PRO 4000 connector ratings. Consult your
product manuals for information about electrical connector ratings.
• WARNING - Ensure all connectors and accessories are tightly and securely
plugged in. Loose connections can lead to fire and other risks.
• WARNING - DO NOT allow the unit to be dropped, seriously jarred, punctured,
or otherwise damaged.
• WARNING - DO NOT use your Tank PRO 4000 if it is damaged or modified.
• WARNING - DO NOT allow foreign objects to enter into inputs, outputs or
ventilation holes.
• WARNING - DO NOT open you Tank PRO 4000 or tamper with or attempt to
replace your battery.
• WARNING - DO NOT allow children to use the Tank PRO 4000.
• WARNING - To reduce the risk of damage to the electric plug and cord, pull the
plug rather than the cord when disconnecting and connectors or plugs.
• WARNING - Two-person lift required. Please use caution when lifting the
power station to prevent injury to yourself or the unit. We recommend using the
wheeled cart when the power station is on flat ground.
• WARNING - Always utilize the Mounting Plate (SKU 96155) and ensure all
latches are tightly secured when stacking the Tank PRO 4000 and Yeti PRO
4000. TIPPING HAZARD: Never stack more than four Yeti Tanks with one Yeti
PRO 4000. Stacking products without the mounting bracket can constitute a
tipping hazard and lead to injury. Stacking more products than recommended
can lead to damage to the products and an injury hazard. Never step or climb
on any Goal Zero products and never allow a child to step or climb on or around
the products.
• WARNING - DO NOT charge, turn on or otherwise use your Tank PRO 4000 if it
is submerged or exposed to a significant amount of liquid, or if any liquid enters
the unit casing. If internal components get wet, your Tank PRO 4000 must
be disposed of. Failure to comply with these guidelines could cause serious
damage, injury, or death. In this case, isolate it in a fire safe location before
disposal. Contact your local fire department if you see any sparks or smell
burning. Contact a local fire department or a local battery recycling center for
instructions on battery disposal requirements in your area. More information
about safely recycling batteries can be found at:
https://www.epa.gov/recycle/used-household-batteries
• Damaged or modified batteries may exhibit unpredictable behavior resulting in
fire, explosion or risk of injury.
• WARNING - DO NOT expose the Tank PRO 4000 to extreme temperatures
(greater than 140 degrees F/60 degrees C or less than -4 degrees F/-20
degrees C).
• WARNING - Keep your unit in a dry, well-ventilated area when in use and do
not obstruct fan openings. Inadequate ventilation may cause damage to your
device.
• WARNING - DO NOT expose the unit to strong electrostatic or electromagnetic
conditions.
• WARNING - DO NOT use your Tank PRO 4000 with life-saving medical
equipment. Take special care whenever using your device with medical
equipment or around medical equipment and ensure that the specified
requirements of the medical equipment are compatible with the device. Your
Tank PRO 4000 is not a certified Uninterruptable Power Supply and has not
been tested to hospital-grade standards or any standards specifically related
to medical equipment.
WARNING
Be sure the cable is fully inserted into the expansion port on the back of the Yeti
PRO 4000 before use. Check upon subsequent uses. For questions, contact the
Goal Zero Solutions Center at support@goalzero.com or 1-888-794-6250.

Publicidad

loading