Descargar Imprimir esta página

Kicker PXIBT100.2 Manual Del Propietário página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Authorized KICKER Dealer:
Purchase Date:
Serial Number:
IMPORTANT SAFETY WARNING – PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER IN A DISTORTED OR CLIPPED MANNER
CAN CAUSE YOUR AUDIO SYSTEM TO OVERHEAT, POSSIBLY CATCHING FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR
COMPONENTS AND/OR VEHICLE. KICKER PRODUCTS ARE CAPABLE OF PRODUCING SOUND LEVELS THAT CAN PERMANENTLY
DAMAGE YOUR HEARING! TURNING UP A SYSTEM TO A LEVEL THAT HAS AUDIBLE DISTORTION IS MORE DAMAGING TO YOUR EARS
THAN LISTENING TO AN UNDISTORTED SYSTEM AT THE SAME VOLUME LEVEL. THE THRESHOLD OF PAIN IS ALWAYS AN INDICATOR
THAT THE SOUND LEVEL IS TOO LOUD AND MAY PERMANENTLY DAMAGE YOUR HEARING. PLEASE USE COMMON SENSE WHEN
CONTROLLING VOLUME.
PERFORMANCE
Model:
RMS output @ 4-ohms
RMS output @ 2-ohms
Selectable 12dB high-pass crossover
Frequency response
RCA pre-out voltage
S/N ratio
Aux input sensitivity
USB audio input / charging
Length [in, cm]
Height [in, cm]
Width [in, cm]
Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year,
use genuine KICKER accessories and wiring.
INSTALLATION
Mounting: Choose a structurally
sound location to mount your KICKER
PXIBT100.2. Make sure there are no items
behind the area where the screws will
be driven. Choose a location that allows
at least 4" (10cm) of open ventilation for
the amplifi er. Drill four holes using a 7/64"
(3mm) bit and use the supplied #8 screws
to mount the amplifi er. Mount the unit
behind the fairing, underneath the seat, or
in another secure location isolated from
weather.
2
2016 PXiBT100.2 Rev G.indd 2
2016 PXiBT100.2 Rev G.indd 2
PXIBT100.2 OWNER'S MANUAL
PXIBT100.2
25 Watts x 2
50 Watts x 2
OFF, 60Hz, 80Hz, 120Hz
20Hz – 20kHz (+/- 1dB)
4.5V RMS
90dB
500mV
5V/1A
7, 17.8
1-5/8, 4
3-7/16, 8.7
Mount the PXIBT100.2 using the included screws.
12/8/2015 11:35:28 AM
12/8/2015 11:35:28 AM

Publicidad

loading