EINHELL GE-GS 18/150 Li-Solo Manual De Instrucciones Original página 15

4. Technical data
Motor power supply: ............................... 18 V DC
Stroke speed: ...................................0-2600 min
Stroke height: ............................................ 20 mm
Cutting depth without branch jaw clamp: . 100 mm
Cutting depth with branch jaw clamp: ........ 80 mm
Maximum saw blade width: ...................... 1.7 mm
Weight: ........................................................1.3 kg
Caution!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power X-
Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power-X charger.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L sound pressure level ..................... 78.0 dB(A)
pA
K uncertainty ............................................. 5 dB
pA
L sound power level ....................... 89.0 dB(A)
WA
K uncertainty ............................................. 5 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Anl_GE_GS_18_150_Li_SPK13.indb 15 Anl_GE_GS_18_150_Li_SPK13.indb 15
-1
= 13.0 m/s
2
h
2
- 15 -
GB
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Warning!
Always remove the battery pack before making
adjustments to the equipment.
5.1 Changing the saw blade (Fig. 3a)
Warning!
Switch off the cordless tree pruning saw and pull
out the battery pack each time before doing any
work on the machine and before changing the
blade.
Open the safety guard (Fig. 3a/Item 7) by pres-
sing it together slightly at the front and then swin-
ging it up.
Turn the ring (A) on the blade holder (4) as
shown in Fig. 3a until the blade (6) lets itself be
24.08.2023 08:20:36 24.08.2023 08:20:36