Save information
1. At the start screen, select
2. Enter your lock code, and press OK. See "Security settings", page 72 for
more information.
3. Scroll to one of the four card memory locations, and select
Dialing
sequence.
4. Select one of the following sequence types:
Access no.+ phone no.+ card
then card number (+ PIN if required)
Access no.+ card no.+ phone
if required), then phone number
Prefix+ phone no.+ card
phone number) and phone number you want to dial, then card number (+ PIN if
required)
5. Enter the required information (access number or prefix and card number), and
press
OK
to confirm your entries.
6. Select
Card
name.
7. Enter the card name, and press OK.
Make calls
After you have saved your calling card information in your phone, you can make a
call using your calling card.
1. At the start screen, select
2. Enter your lock code, and press OK. See "Security settings", page 72 for
more information.
3. Scroll to the calling card of your choice, select
4. Press the End key to return to the start screen; then enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require when you
make a calling card call.
See your calling card for instructions.
5. Press and hold the Call key for a few seconds until
6. When you hear the tone or system message, press OK.
Menu
>
Settings
>
no.—Dial 1-800 access number, phone number,
no.—Dial 1-800 access number, card number (+ PIN
no.—Dial the prefix (numbers that must precede the
Menu
>
Settings
>
67
Call settings
>
Calling
Options
Call settings
>
Calling
Options
>
Select
> OK.
Card call
is displayed.
Copyright © 2004 Nokia
Settings (Menu 7)
card.
>
Edit
>
OK
>
card.