S e t t i n g s
Save information
1. In the standby mode, select
2. Enter your lock code, and select OK. See "Change lock code," p. 62.
3. Scroll to one of the four card memory locations, and select
Dialing sequence
Access no.+ phone no.+ card
then the card number (and the PIN, if required).
Access no.+ card no.+ phone
(and the PIN, if required), then the phone number.
Prefix+ phone no.+ card
phone number) and phone number you want to dial, then the card number
(and the PIN, if required).
4. Enter the required information (access number or prefix and card number),
and select
OK
to confirm your entries.
5. Select
Card
name, enter the card name, and select OK.
Make calls
After you have saved your calling card information in your device, you can make a
call using your calling card.
1. In the standby mode, select
2. Enter your lock code, and select OK. See "Change lock code," p. 62.
3. Select your desired calling card.
4. Press the end key to return to the standby mode; then enter the phone
number, including any prefix (such as 0 or 1) that your calling card may
require when you make a calling card call. See your calling card for
instructions
5. Press and hold the call key for a few seconds until
6. When you hear the tone or system message, select OK.
Abbreviated dialing
Abbreviated dialing creates 4-5 digit numbers for your contacts.
In the standby mode, select
International prefix
You can store an international dialing prefix into your device. In the standby
mode, select
Menu
56
Menu
>
and one of the following sequence types:
no.—Dial the access number, the phone number,
no.—Dial the access number, the card number
no.—Dial the prefix (numbers that must precede the
Menu
>
Menu
>
Settings
>
Settings
>
Call
>
Settings
>
Call
>
Calling
Settings
>
Call
>
Calling
Card call
>
Call
>
Abbreviated dialing
International
prefix.
card.
Options
>
Edit
>
card.
appears.
>
On
or Off.