Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PNEUMATIC TOOL/COMPRESSOR PROBLEMS
PROBLEM
CORRECTIVE ACTION
Clean or replace as necessary
INSUFFICIENT OUTPUT - LOW
DISCHARGE PRESSURE
Replaces parts as necessary
Tension belts
Close drain valve
Replace pressure gauge
Replace head gasket
Remove and clean tubes
Make necessary adjustments, or replace
Replace worn parts
Replace worn parts
Clean check valve and replace if necessary
Replace valve
MOTOR STALLS
Replace valve correctly
Adjust belt tension
Allow for a longer operating cycle
WATER IN CRANKCASE OIL -
OIL GETS DIRTY, VALVES OR
Provide adequate protection against extreme
weather conditions
CYLINDERS GET RUSTY
Check and replace check valve if necessary
Drain oil and replace with proper oil
Tighten mounting bolts
EXCESSIVE VIBRATION
Reduce operating pressure
Level compressor
Loose leg bolts
Drain and replace with proper oil
23
Publicidad
