Sansui AU-X417R Manual De Instrucciones página 7

CAUTION
continue to flow through part of the circuit.
2 REMOTE STANDBY Indicator
When lit:
When blinking:
3 MUTE Key/MUTING Indicator
volume returns to the original level.
4 Infrared Light Receptor
5 PHONES Jack
* Unplug the headphones from the jack when not in use.
6 SPEAKERS Switch
press this switch to the "ON (am) position.
7 TONE Switch
8 Tone Controls (BASS, TREBLE)
9 INPUT SELECTOR
to the LINE jacks.
frequency characteristics to their flat state.
11 REC SELECTOR
position to disconnect the recording circuit and prevent
the playback sound from being affected by electrical
noise from the tape deck.
12 VOLUME Control
VOLUME Keys
13 BALANCE Control
14 Infrared Light Emitter
When a key is pressed on the remote controller, an infrared signal
corresponding to the command for that key is emitted from this area.
15 Tuner Operation Keys
18 MODE Key