Taurus LIQUAFRUITS PRO COMPACT Manual Del Usuario página 7

- Before opening the blender, ensure that the
motor has stopped completely.
- Open the two closing clamps (E)
- Remove the deposits of juice (F) and pulp (G),
the pusher (A) and the protective lid.
- First pull the filter (C) and then the upper body
(D).
- Remark: If you process a large quantity of fruit,
you must periodically clean the filter and remo-
ve the remains of the pulp.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the
selector control. (I)
- Unplug the appliance from the mains.
- Clean the appliance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not submerge the appliance in water or any
other liquid or place it under running tap.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
- The following pieces may be washed in a dish-
washer (using a soft cleaning program):
- Plunger
- Protective lid.
- Removable filter
- Filter holder
- Pulp collector
- Juice jug
- All the parts apart from the motor body can
be cleaned under the tap using detergent or
washing-up liquid.
- The filter must not be cleaned using aluminum
scourers or other metal objects.
- Remove the leftover detergent well from the
parts which may be in contact with the food.
- Then dry all parts before its assembly and
storage.