Publicidad
14
Press to display the T.INFO indicator.
| T
37 aks
| T.INFO TP
Press the DN or UP button to select your
desired traffic information station. When a
traffic information station is tuned in, the TP
indicator lights up.
Traffic information is heard only when it is
being broadcast. If traffic information is not
being broadcast, the unit is set in the standby
mode. When a traffic information broadcast
begins, the unit automatically receives it, the
display shows "TRF-INFO", and within 5
seconds the PS being received appears.
When traffic information broadcast is over, the
unit will automatically set in the standby
mode .
Notes:
°
If the traffic information broadcast signal
falls below a certain level, the unit remains
in the receiving mode for 1 minute. If the
signal remains below a certain level for
over 1 minute, the unit is set in the standby
mode for the traffic information broadcast.
* 'lf you do not want to listen to the traffic
information being received, lightly press
the T. INFO button to skip that traffic
information message. The T. INFO mode
will remain in the ON position to receive
the next traffic information message.
Publicidad
