Publicidad
Idiomas disponibles
Idiomas disponibles
jpn
:
B APMS (Automatic Programmable Music
Selector)
1 Load a disc and close the CD compartment.
©
@
2 Press the UP button to select a desired track forward, and
M
the DOWN
button to select a desired track backward. Then
Gao
ws
o0D
press the MEMORY button. The "M" and "P" indicators light
to show that programmed
sequence
is being entered
into
®
4
@)
memory.
The SECOND
indicator will show the selected
track number, and MINUTE indicator will show the playback
the 10 track number input buttons on the remote control.
@ For example, to choose selection 12
(1}Press the "1" button on the remote control.
{2)Press the "2" button on the remote control.
@ "12" appears on TRACK NO, indicator.
@ "Er" appears on TRACK
NO, indicator if a selection number
exceeding
total number
of selections
on disc is entered.
Enter another selection number.
3 Repeat step 2 for any other track. Up to 20 tracks can be
programmed.
4 Press the PLAY button to start playback of memorised
pro-
gramme.
Notes:
@ During playback or pause, programming is not possible. -
@ Programmed tracks are displayed in sequence: P01 ,PO2, etc.
Call, Clear
1 Press the CALL button whilst the disc is stopped to review the
order of a programmed
sequence
before playback begins.
The playback sequence and track numbers will be displayed
for easy confirmation.
2 Press the CALL button during playback or pause to check the
number of the next track to be played.
cy
MDP ein riaM
P
oa
o4aga
Hi
oF
3 In order to clear the entire programmed sequence, first press
the STOP/CLEAR button to stop the disc, and then press the
STOP/CLEAR button again the same number of times as the
T
number of tracks which were programmed.
@ Each time the button is pressed, one track will be cleared,
s
beginning with the jast track programmed.
STOPY_
[Lestorcuean | |e
C3
@ Opening
the CD
compartment
automatically
cancels
the
programmed sequence.
Publicidad
