Description Of Symbols - Triton TTS1400 Instrucciones De Uso

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Wear protective shoes
Wear protective clothing
Be aware of kickback!
Warning: Sharp blades or teeth!
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
WARNING: Moving parts can cause crush and cut injuries
Caution!
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
GB
Conforms to relevant legislation and safety standards.
4
Original Instructions
Technical Abbreviations Key
V
~, AC
A, mA
n
0
Ø
°
Specification
Model no:
Voltage:
Power:
No load speed:
Bevel adjustment:
Max depth of cut @ 90°:
Max depth of cut @ 45°:
Blade dimensions:
Protection class:
Ingress protection:
Weight:
As part of our ongoing product development, specifications of Triton products may
alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and
provides the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition.
If necessary, limit the length of time exposed to vibration and use anti-vibration
gloves. Do not operate the tool with hands below a normal comfortable temperature,
as vibration will have a greater effect. Use the figures provided in the specification
relating to vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to international
standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may
produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods of time.
Volts Hz Hertz
W, kW
Alternating current Watt, kilowatt
/min or
Ampere, milli-Amp (revolutions or
min reciprocation) per minute
-1
No load speed
dB (A) Decibel – A weighted
Diameter
Degrees m/s Vibration magnitude
2
TTS1400
120V~ 60Hz
12A
2000 – 5000min
0° - 48°
54mm (2-
38mm (1-
Ø165mm (Ø6-1/2") x 20mm
IP20
5.5kg (12lbs)
-1
⁄ ")
1
8
⁄ ")
1
2