Description Of Symbols - Triton TWX7CS001 Instrucciones De Uso

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this
product. This product has unique features and, even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the product or
instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Be aware of kickback!
Warning: Sharp blades or teeth!
Indoors use only!
DO NOT use in rain or damp environments!
Caution!
Toxic fumes or gases!
DO NOT touch! DO NOT access the guard without removing the power. Keep children and bystanders
away while operating a power tool. Distractions can cause you to lose control. All visitors should be kept
safe distance from work area.
Always disconnect from the power supply when adjusting, changing accessories, cleaning, carrying out
maintenance and when not in use!
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice.
GB
2
Original Instructions
Specification
Model number:
Power:
IP rating:
No load speed:
Carbide metal saw blade:
Saw blade requirements:
Contractors saw module size L x W x H:
Max rip cut capacity:
Max. Cutting depth at 90°:
Max. Angle cuts at 45°:
Table with side extension width:
Table with outfeed extension length:
Max. workpiece size L x W
Dust extraction port size:
Weight:
Combined weight (TWX7 & TWX7CS001):
Sound and vibration information
Sound pressure L :
PA
Sound power L :
WA
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time of exposure if
necessary. If sound levels are uncomfortable, even with ear protection, stop using the tool immediately and check the
ear protection is correctly fitted and provides the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and reduced
ability to grip. Long term exposure can lead to a chronic condition. If necessary, limit the length of time exposed to
vibration and use anti-vibration gloves. Do not operate the tool with hands below a normal comfortable temperature,
as vibration will have a greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound levels in the specification are determined according to EN61029-1 or similar international standards.
The figures represent normal use for the tool in normal working conditions. A poorly maintained, incorrectly assembled,
or misused tool, may produce increased levels of noise and vibration. www.osha.europa.eu provides information on
sound and vibration levels in the workplace that may be useful to domestic users who use tools for long periods
of time.
TWX7CS001
1800W / 8A
IPX0
4500/min
EN 847-1 compliant 254 x 30 x 2.6mm, 40 tooth
Diameter: Ø255mm +/- 1.0mm
Body thickness: 1.8mm +/- 0.1mm
Kerf: 2.6mm +/- 0.1mm
Arbor: Ø30mm
679 x 422 x 449mm
775mm
86mm +/-1mm
59.5mm +/-1mm
+600mm
+670mm
851x775mm
(without additional side support and outfeed support)
64.5/ 32.6mm
15kg
46kg
92.3dB(A)
104.6dB(A)
2.5dB