Description Of Symbols - Triton TJS 001 Instrucciones De Uso Y De Seguridad

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
Toxic fumes or gases!
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
WARNING: Moving parts can cause crush and cut injuries.
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Conforms to relevant legislation and safety standards.
GB
6
Original Instructions
Technical Abbreviations Key
V
~, AC
A, mA
n
0
n
opm
spm
°
Ø
Specification
Voltage:
Power:
Ingress protection:
No load speed:
Stroke:
Blade mounting:
Supplied blades:
Pendulum:
Cutting angle range:
Cutting depth in:
Wood:
Aluminium:
Steel:
Dimensions (L x W x H):
Weight:
As part of our ongoing product development, specifications of Triton products may
alter without notice.
Hz
Volts
, DC
Alternating current
W, kW
Ampere, milli-Amp
/min or min
No load speed -1
rpm
Rated speed
dB(A)
Orbits or oscillations
per minute
m/s
Strokes per minute 2
Degrees
Diameter
120V, 60Hz
6.5A
IP20
800-2900min
-1
26 mm (1")
Bayonet T shank
Wood blade: low profile, curved cuts in wood
(natural & composite woods)
Wood blade: fast straight cuts in wood
(natural & composite) & plastics
Metal blade: cuts ferrous and non-ferrous metals
3 Stage
0°, 15°, 30° & 45° (left & right)
110mm (4 – 5/16")
25mm (1")
10mm (3/8")
340 x 85 x 215mm (13.4" x 3.4" x 8.5")
3.5kg (7.8lb)
Hertz
Direct current
Watt, kilowatt
Operations per minute
Revolutions per minute
Decibel sound level (A
weighted)
Metres per second
squared (vibration
magnitude)