Publicidad
Idiomas disponibles
Idiomas disponibles
EN
32
OPERATION
The temperature of the device may be set between 8-18 °C (46-64 °F).
It is recommended to place the device in a place where the ambient temperature
is between 16-32 °C (61-90 °F). If the ambient temperature is above or below the
recommended temperatures, the performance of the device may be affected.
For example, if you place the unit in an extremely cold or hot place, the internal
temperature may fluctuate. The range of 8-18 °C (46-64 °F) may then not be
reached.
You can switch the temperature display from Fahrenheit to Celsius by pressing the
button for two seconds. The temperature reading in Fahrenheit or Celsius
appears on the display in white with a blue background.
Control panel and button functions
•
You can turn the interior light on or off with a single press of the
The light will turn off automatically after it has been on for a few minutes. If
you press the button again, the light will turn on again.
•
You can switch the temperature display from Celsius to Fahrenheit by pressing
and holding the
•
The cooling device is equipped with an automatic control panel lock that is
activated 20 seconds after the last time a button is touched. Press and hold
the
button for 2 seconds to unlock the control panel. You will hear a beep
indicating that the control panel is now active.
•
You can set the desired temperature by pressing the
on the control panel. Pressing the
temperature by 1 C. Pressing the
by 1 C.
Note: When you use the device for the first time or turn it on again after a long
break, there may be a difference of a few degrees between the temperature you
have selected and the temperature shown on the LED display. This is normal
and is related to the duration of the on-time. Once the device has been running
for a few hours, everything will be back to normal.
button for 2 seconds.
button once increases the desired
button once decreases the temperature
button.
or
button
Publicidad
