• If you want to clean the casing completely, use only hot soapy water and a cloth
or brush with nylon bristles.
• Remove the grates and burners before completely cleaning the housing.
• Do not immerse the burner knobs or manifold in water.
• Check the operation of the burners after carefully placing them back into the
housing.
5.5 Mountings
Check all metal mountings annually and tighten if necessary.
6. STORAGE
• Store the product in a cool, dry place.
• Cover the burners with aluminum foil to prevent insects or other debris from
accumulating in the burner holes.
• If the product is stored indoors, the gas cylinder should be disconnected and left
outside.
• The gas cylinder should always be stored outdoors, in a dry, well-ventilated area,
away from heat sources or ignition sources.
ATTENTION!
◊ Do not allow children near the gas cylinder!
7. DISPOSAL AND RECYCLE
Think about the environment and contribute to a cleaner living environment! You
can contact your local council for all information on disposal options for discarded
products.
English
51