Clearing A Jam - Metabo HPT NR 3675DD Instrucciones Y Manual De Seguridad

CLEARING A JAM

If nails are jammed in fi ring head, remove it, and adjust the
nailing in the following order.
CAUTION
● Remove the battery from the Nailer.
Remove the battery from the Nailer. (See page 15)
Remove all nails. (See page 21)
Remove the M5 bolts with wrench.
Do not loosen
these screws
Pull magazine away from the fi ring head, and clear
jam.
CAUTION
● NEVER hit the driver blade.
● NEVER point the tool at yourself or another
person, to avoid risk of injury by mis-fi ring.
Even if the battery is removed from the nailer,
there is still energy of compressed air remaining
inside.
Attach the magazine to the injector and tighten with
the M5 bolt.
NOTE
● In case of frequent jam, contact a metabo HPT
authorized service center.
English
25