Num'axes FUG1033 Manual De Instrucciones página 36

• Technical specifications
Power
Tightness
Temperature limitations
Dimensions
Weight
Antenna wire
The device is to be used only with the power source provided by NUM'AXES.
Restricted to indoor use only.
The device is also designed for IT schema with tension between phases of 230 V.
Power
Battery life
Tightness
Levels of stimulations
Temperature limitations
Dimensions
Weight
(battery included)
guide canifugue MIX FUG1033 IndB.indd 36
Transmitter
220 V AC
Charger: input 230 V, 50 Hz, 16 mA/output 7.5 Vdc, 200 mA
Shower proof
Between – 20°C and + 40°C
134 mm x 84 mm x 25 mm
130 g
0,52 mm² (100 m supplied with the kit) or 2,5 mm²
Wire section recommended depending on the length of the system:
− for less than 800 m of antenna wire: 0,52 mm²
− from 800 to 2 000 m of antenna wire: 2,5 mm²
Receiver collar
1 lithium 3 Volts CR2 battery
6 months in stand-by (approx.)
Waterproof
8
Between -20°C and +40°C
59 mm x 39 mm x 31 mm
57 g (without strap)
Collar adjustable to neck sizes from 20 to 67 cm
36
02/04/2019 11:01