Publicidad
Idiomas disponibles
Idiomas disponibles
English
Description
This converter by Delock enables the simultaneous operation of an M.2 NVMe
SSD, in 2280, 2260, 2242 and 2230 format, and a 2.5" or 3.5" SATA HDD or SSD
through the USB interface.
Clone Function without PC
The built-in clone function allows to clone memory without using a PC. It is
possible to clone from NVMe to SATA and SATA to NVMe.
Specification
• Connectors:
1 x USB 10 Gbps USB Type-C™ female
1 x M.2 key M slot
1 x SATA 6 Gb/s 22 pin receptacle
1 x DC jack
• Chipset: JMicron JMS581D
• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key
B+M based on PCIe (NVMe)
• Maximum height of the components on the module: 1.5 mm, application of
double-sided assembled modules supported
• For 2.5" and 3.5" SATA HDD / SSD
• Supports NVM Express (NVMe)
• Supports S.M.A.R.T.
• Supports TRIM
• Supports Native Command Queuing (NCQ)
• Data transfer rate up to 10 Gbps
• Supports UASP
• 7 x LED indicator for power, access and copy status
• Bootable
• Function key:
1 x Clone button
1 x On / Off switch
1 x switch for clone mode
• Dimensions (LxWxH): ca. 107 x 35 x 24 mm
• Hot Plug, Plug & Play
-2-
Publicidad
